200µm
Film thickness
Working layer. TPU body 180 µm, self-healing top coat 15 µm, adhesive 5 µm.
Source · GB/T 7125-2014
Technology
Invisible, but always at work.
A top coat that recovers with heat, a TPU body that disperses impacts, a surface that sheds water and UV that never reaches the paint. Each with a defined thickness, role and measurement.
Technology
Inside 200 microns, six layers.
Thickness alone is not protection. Every layer has a job, a thickness and a source.
Protective liner
Protects the top surface until application; removed during installation.
removed
Self-healing top coat
Nano coating. Hydrophobic; light scratches recover with heat.
15 µm
UV filter
Stops ultraviolet before it reaches the paint.
TPU main body
Flexibility and impact absorption live here.
180 µm
Acrylic adhesive
180° peel > 865 gf/25 mm; leaves no residue on removal.
5 µm
Release liner
Protects the adhesive; removed during installation.
removed
Schematic · heat it with your cursor
01 · Self-healing top coat
Heat rebuilds the surface.
The nano coating is an elastic polymer network. A light scratch compresses the network; with sunlight, warm water or a heat gun it returns to its original shape and the mark disappears. A deep cut breaks the network; that does not recover.
Film on a curve · illustrative image02 · TPU body
It disperses impacts and does not crack.
180 microns of thermoplastic polyurethane spread a stone chip's energy over a wide area and withstand 99.3 kg of force per square centimetre. Unlike PVC it does not harden or whiten on curves.
Beading water · illustrative image
03 · Hydrophobic surface
Water won't stick, dirt won't stick.
The surface beads water; bird droppings, insects and sap cannot take hold. Washing is quicker and the gloss lasts.
Production
Every roll from the same line, to the same recipe.
Coating, slitting and winding take place in a controlled environment; every roll goes into its box with a serial number. The number of the roll used is recorded in the warranty register. Footage from the brand film.
Measured values
We don't just say it. We measure it.
Every value comes from the product certificate or data card, with its standard or method alongside. Diagrams show the principle; scale is illustrative.
With heatit recovers
Self-healing top coat
Light scratches disappear with sunlight, warm water or a heat gun. Deep cuts do not recover.
Source · Nano top coat · 15 µm
99,3kgf/cm²
Puncture resistance
The TPU body spreads a stone chip's energy over a wide area; the paint never feels the impact.
Source · Laboratory measurement
> 865gf/25 mm
Adhesion to steel, 180° peel
Edges stay down; when removed, the acrylic adhesive leaves no trace on the paint.
Source · GB/T 2792-2014
%99,99
UV filter
Ultraviolet is stopped before it reaches the paint: the paint does not fade and the film does not yellow.
Source · Product data card
Beadingeffect
Hydrophobic surface
Water beads and runs off; dirt, insects and sap cannot cling, so washing takes less time.
Source · Nano top coat
What happens on the road?
Not accidents. Everyday life. What does the film protect against?
Images are illustrative.
Stone chipsGravel thrown up by the car ahead on the motorway chips the paint on the bonnet and bumper.The TPU body disperses the impact.
Wash scratchesBrush washes and dirty cloths leave a fine web of scratches in the clear coat.The top coat recovers with heat.
Bird droppings and insectsAcidic residue heats up in the sun, etches the clear coat and leaves permanent marks.The hydrophobic surface makes it hard to stick.
Sun and UVOver the years colour fades and gloss dulls.The UV filter stops the rays before they reach the paint.
Road salt and chemicalsWinter salt, acid rain and road chemicals leave marks on the surface.The film puts a barrier between them and the paint.
Parking scuffsLight marks from doors opening in car parks or bags rubbing against the body.The mark stays on the film, not the paint.Technical data sheet
No figure without a source.
Values from the product certificate and data card. Standard or source on every row.
| Working layer thickness | 200 microns | GB/T 7125-2014 |
|---|---|---|
| Adhesion to steel, 180° peel | > 865 gf/25 mm | GB/T 2792-2014 |
| Puncture resistance | 99.3 kgf/cm² | Laboratory measurement |
| TPU main body | 180 microns | Product certificate |
| Top coat | 15 microns | Nano coating |
| Adhesive | 5 microns | Acrylic |
| UV filter | %99,99 | Product data card |
| Storage | 21 ± 2 °C · 50 ± 5% humidity | Original packaging |
Cutting and application
Not a blade, a a plotter.
The film is cut on a plotter from a vehicle-specific template; no blade ever touches the paint. Every application at an authorised centre follows the same four steps.
01Surface preparation
The paint is cleaned and, if needed, corrected with polishing.
02Laying and stretching
The film, cut on the plotter for the specific car, is laid on the surface.
03Squeegee placement
Water and air are pushed out with a squeegee.
04Heat and edge wrapping
On curves the film is shaped with heat; edges are wrapped inside the panel.
Images are illustrative.
Measured quality, registered warranty.
Every application is entered into the digital warranty system with the serial number of the roll used and photos; it can be checked from anywhere with the plate and phone.
Dealership
Become the authorised Ultimate installer in your region.
Film direct from the manufacturer, hands-on training, a 7-year digital warranty system and a dealer portal.